4 days
Privée

Objectif :

L'objectif de cette formation de quatre jours consiste à permettre aux opérateurs, aux techniciens et aux ingénieurs en métrologie ayant peu ou pas de connaissance de PolyWorks Metrology Suite d'effectuer des inspections 3D à l'aide d'outils provenant de PolyWorks|InspectorMC. Plus précisément, elle traite des concepts clés d’un processus d’inspection typique pour MMT CNC, avec des capacités de palpage et de scan.

 

Préalables :

  • Les personnes en formation doivent bien connaître leur MMT CNC et l’équipement qui y est connexe, notamment pour effectuer des calibrations, utiliser des composantes, définir des paramètres opérationnels (meilleures pratiques), en plus de ce qui a trait à la performance, à la maintenance et à l’entretien.
  • Les personnes en formation doivent avoir des connaissances de base en métrologie et être capables de lire des dessins techniques.
  • Les personnes en formation doivent avoir des compétences de base en informatique (systèmes d’exploitation Windows).

Outline:

  • Manage files and navigate through the PolyWorks® interface
  • Create and edit a machine configuration
  • Define a measurement plan and create a measurement sequence to perform the automated measurement of a part, online and offline
  • Measure surface deviations and control part dimensions by CNC probing
  • Measure surface deviations and control part dimensions by CNC scanning
  • Align measured part to the CAD model
  • Review, report, and share inspection results
  • Inspect multiple pieces

Manage files and navigate through the PolyWorks® interface

  • Navigate through the PolyWorks Workspace Manager interface
  • Create and save a workspace
  • Navigate through the PolyWorks|Inspector interface
  • Create and save a PolyWorks|Inspector project

 

Create and edit a machine configuration

  • Create and edit a machine configuration
  • Create and locate reference spheres
  • Create tools
  • Create and locate tool changers, specify ports
  • Create and calibrate tool orientations

 

Define a measurement plan and create a measurement sequence

  • Define a typical inspection workflow
  • Import a CAD model and use as a Reference object
  • Create features, comparison points, and cross-sections
  • Set dimensional and GD&T controls and tolerances
  • Create a measurement sequence to perform the automated measurement of objects
  • Accelerate measurement sequence creation using the assisted sequence creation tool
  • Detect and avoid potential collisions
  • Adjust the inspection project for a different device
  • Prepare an inspection project using the Offline Simulation mode

 

Measure by CNC probing

  • Measure objects using the Probe and CNC Probe methods
    • Features and comparison points

 

Measure by CNC scanning

  • Configure a scanning device
  • Scan a polygonal model using quality metrics
  • Clean data while scanning using a clipping plane
  • CNC Scan using define paths: area or linear
  • Measure deviations to Reference object surfaces using data color maps
  • Extract measurement objects from scan data
    • Features, comparison points and cross-sections

 

Align measured part to the CAD model

  • Align using a CMM Prealignment
  • Align using Surface Points
  • Align using objects
    • Perpendicular Planes
    • Plane, Axis, Center Point
    • Best-Fit Measurement Objects
  • Best-fit Data to Reference Objects
  • Align using Datum Reference Frames
  • Create coordinate systems

 

Review, report, and share inspection results

  • Review measurement results using the Control Reviewer
  • Structure measurement results using control views
  • Create formatted reports using snapshots and tables
  • Share and review inspection results using PolyWorks|Reviewer™

 

Inspect multiple pieces

  • Create a piece template for multipiece inspections
  • Review multipiece inspections using Object Control SPC