
3 days
Objectif :
L'objectif de cette formation de trois jours consiste à permettre aux opérateurs, aux techniciens et aux ingénieurs en métrologie, s'étant déjà familiarisés avec PolyWorks Metrology Suite lors de l'utilisation d'un dispositif de métrologie portable, d'effectuer des inspections 3D à l'aide de MMT CNC et d'outils provenant de PolyWorks|InspectorMC. Plus précisément, elle vise à créer des plans de mesure et à exécuter des séquences de mesure à l'aide de MMT CNC.
Préalables :
- Les personnes en formation doivent bien connaître leur MMT CNC et l’équipement qui y est connexe, notamment pour effectuer des calibrations, utiliser des composantes, définir des paramètres opérationnels (meilleures pratiques), en plus de ce qui a trait à la performance, à la maintenance et à l’entretien.
- Les personnes en formation doivent avoir complété avec succès une formation de base en métrologie portable ou avoir déjà utilisé un dispositif de métrologie portable avec PolyWorks|Inspector.
- Les personnes en formation doivent avoir des connaissances de base en métrologie et être capables de lire des dessins techniques.
- Les personnes en formation doivent avoir des compétences de base en informatique (systèmes d’exploitation Windows).
Outline:
- Create and edit a machine configuration
- Define a measurement plan and create a measurement sequence to perform the automated measurement of a part, online and offline
- Measure surface deviations and control part dimensions by CNC probing
- Measure surface deviations and control part dimensions by CNC scanning (if applicable)
- Align measured part to the CAD model
- Review, report, and share inspection results
- Inspect multiple pieces
Create and edit a machine configuration
- Create and edit a machine configuration
- Create and locate reference spheres
- Create tools
- Create and locate tool changers, specify ports
- Create and calibrate tool orientations
Define a measurement plan and create a measurement sequence
- Define a typical inspection workflow
- Import a CAD model and use as a Reference object
- Create features, comparison points, and cross-sections
- Set dimensional and GD&T controls and tolerances
- Create a measurement sequence to perform the automated measurement of objects
- Accelerate measurement sequence creation using the assisted sequence creation tool
- Detect and avoid potential collisions
- Adjust the inspection project for a different device
- Prepare an inspection project using the Offline Simulation mode
Measure by CNC probing
- Measure objects using the Probe and CNC Probe methods
• Features and comparison points
Measure by CNC scanning (if applicable)
- Configure a scanning device
- Scan a polygonal model using quality metrics
- Clean data while scanning using a clipping plane
- CNC Scan using define paths: area or linear
- Measure deviations to Reference object surfaces using data color maps
- Extract measurement objects from scan data
• Features, comparison points and cross-sections
Align measured part to the CAD model
- Align using a CMM Prealignment
- Align using Surface Points
- Align using objects
• Perpendicular Planes
• Plane, Axis, Center Point
• Best-Fit Measurement Objects - Best-fit Data to Reference Objects
- Align using Datum Reference Frames
- Create coordinate systems
Review, report, and share inspection results
- Review measurement results using the Control Reviewer
- Structure measurement results using control views
- Create formatted reports using snapshots and tables
- Share and review inspection results using PolyWorks|Reviewer™
Inspect multiple pieces
- Create a piece template for multipiece inspections
- Review multipiece inspections using Object Control SPC